Technical Specifications
Patio Drop Shade
- Available in widths of 28” up to 240”, measured from end of bracket to end of bracket. Split-Roller applications are available in widths up to 408”. Please allow ¾” for motor bolts and gudgeon bearing.
- Available with drops of 12” to 240”. The total drop is measured from the top of the bracket to the bottom of the hem bar.
- Available guides include tracks (using the Titan Cassette Shade track and hem bar), cables or a combination.
- Brackets are powder-coated steel, and are available in three (3) standard colors; White, Tan & Bronze.
- Available with Manual Operation or Motorized Operation.
- Motorized units powered by Somfy, the premier motor in the industry. Motorization options include a wide range of Standard and Altus RTS motors.
- A wide selection of fabrics, available in either a roll-off the back or “waterfall” off the front application.
- Solar fabric seams are welded – not sewn, and are always horizontal. Acrylic can be either horizontal or vertical.
- Standard seam placement will be as high as possible, or specific seam placement is available. Seam placement is measured from the bottom of the hem bar.
- Units may be wall mounted or soffit mounted.
- Fabric gap on Motorized & Manual Operation products with tack guides is approximately ¼” (edge or fabric to track). Fabric gap on Motorized Operation products with cable guides is approximately 1” (edge of fabric to cable). Fabric gap on Manual Operation products with cable guides is approximately 1” when manual crank is located on the outside of the mounting bracket. Fabric gap on Manual Operation products with cable guides is approximately 2” when manual crank is located on the inside of the mounting bracket (between tube & bracket).
- Roller tubes are 60/61 T6 alloy, available in a 78mm size.
- Limited Lifetime Warranty.
